Toolheads
Zünd Quality and Durability
From Zünd's extensive assortment of tool heads, select the combination that will work best for you and your particular application. Remember, in keeping with Zünd modularity, all tool heads can go on every cutter model and every cutter model can easily be upgraded with additional tool heads later on.
| C2/C2-P |
 Cutting/plotting head with tangentially-controlled blade and pen inserts for alternate plotting or cutting. Max. cutting pressure 1,500g. C2-P (shown): Dual function plotting/cutting head with attached pen module. |
| Tz-P |
 High-performance single-module tool head with (tangential/z-axis controlled) cutting module and attached pen module. |
| Tz-T-P |
 High-performance dual-module cutting head (tangential/z-axis controlled), with attached pen module. Also available as Tzs-T-P20 with extended stroke for machines with 60mm/2.36" clearance. |
| Tz-2T-P |
 High-performance triple-module cutting/scoring head (tangential/z-axis controlled), with one 40mm module, two 20mm modules) and attached pen module. |
| Tz-P20-No |
 Triple function cutting/punching head with tangential/z-axis controlled cutting module, dual punch modules, and attached pen module. |
| Tz-R45-P |
 Tz-R45-P (shown): Cutting/routing head with (tangential/z-axis controlled) cutting module, 150W or 450W router spindle, and attached pen module.R-45-P: Same as Tz-R45-P but without cutting module (for routing/plotting applications only). |
| Rz-P |
 Z-axis controlled 3-D routing head with 150W or 450W router spindle and attached pen module. |
| T75-P |
 T75-P (shown): Dual function cutting head with one large tangentially controlled cutting module for straight and angle cuts, with attached pen module.- available with adapter for various tool inserts- cuts at angles up to 15 degrees (see also V-cut tool below) - T75-module also accommodates the V-cut tool for cutting thicker POP/POS materials (e.g. X-board, Re-board, Kappa, corrugated cardboard, etc.) at a 45-degree angle for display applications. Tz-T75-P: Same as above but with additional tangentially controlled cutting module. |
| V-cut |
 V-cut tool for cutting thicker POP/POS materials (e.g. X-board, Re-board, Kappa, corrugated cardboard, etc.) at a 45-degree angle for display applications. Tz-T75-P: Same as above but with additional tangentially controlled cutting module. |
| Tzs-P20 |
 Same as Tz-P above but with extended, 60mm/2.36" stroke for cutting up to 50mm/2" thick, soft materials, e.g. foam, filter materials. For machines with extended clearance only. |
| Tz-2P |
 Same as Tz-P above but with two attached pen modules. |
| R45s-P20 |
 1kW routing head with attached pen module. Capable of routing up to 2" thick materials on machines with extended, 60mm/2.36" clearance (up to max. 1"on machines with standard 30mm/1.18" clearance). |
| Tz-R45s |
 Z-axis controlled tangential module with 1kW routerhead. |
| Tzs-R45s |
 Combination 1kW routing/cutting head with (tangential/z-axis controlled) cutting module and 1kW router spindle. Capable of cutting/routing up to 2" thick materials on machines with extended, 60mm/2.36" clearance. Also available as Tz-R45s for cutting/routing up to max. 1" on machines with standard 30mm/1.18" clearance. |
Explanation of Abbreviations used in Tool Head designations
TZ Tangential module - z-axis controlled
RZ Router - z-axis controlled
P20 Pen module with 20mm stroke
TZS Tangential module, z-axis controlled, with 60mm / 2.36" stroke
NO+ Notching/punching module
